What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 05:16
The third is lightning and “how it gets conducted into a home.”
An AC voltage/ current source, and an ac inductive load.
For this case there are devices called Metal oxide varistors (MOV).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The bolt then partially travels down the line to your home.
There are three different concepts here that are getting confused.
Here's What Happens to Your Blood Pressure When You Eat Blueberries Every Day - AOL.com
In schematic diagrams this is the symbol for a fuse:
First Sentence:
[image of Common-mode choke]
Watch BETA Technologies’ electric aircraft fly into NYC with passengers onboard [Video] - Electrek
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
UK civil servants who used AI saved two weeks a year, government study finds - Financial Times
There are two important concepts here.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But… the neutral is now “floating” because of the 1 ohm resistance.
Call of Duty plagued with issues after Season 4 launch - Windows Central
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Because the load is inductive, the current lags the voltage.(by a bit).
but I think this circuit , shows a few more pieces.
Mario Kart World tech analysis, including frame rate and resolution - Nintendo Everything
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Now when you have a certain ac resistance, then a current flows in a loop.
NASA Cuts Funding Support For Lunar, Planetary and Space Sciences Conferences - NASA Watch
One is “what exactly is in a ‘surge protector’ ? ”
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is where the MOV conducts again, and dissipated the energy.
2024–10–14 [Omar Gharbi Omar Gharbi ]
A circuit breaker is similar, but is resettable.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What is your best and worst childhood memory? What was your biggest fear as a child?
eight
This is where this question deviates from being a 'generic' question, and becomes more specific.
Upvotes:
I post the exact comment here.
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fixing the Phoenix Suns: Retooling the roster in 6 steps - Bright Side Of The Sun
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
A fuse is a non-resetable over current circuit protector.
Hypertension: New drug shows strong results in managing blood pressure - Medical News Today
nine
One
These devices are installed between the “hot” and “neutral” and protective ground.
Fresh iPhone 17 leak gives first close-up look at next-gen Apple smartphones - Mashable
It seems Mohan does not understand the difference between a comment and an Answer.
These are simplified answers to the original question, and does not change anything I wrote above.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At one ohm, the resistor has a maximum of 1 watt power.
This one hit behind the barn.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
the problem then depends on "how fast does the fuse operate?".
what exactly is a ‘surge’ protector?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then describes the function of a fuse.
What is lightning?
He then describes Rainy Season and Lightning.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then asserts :
[old diagram got deleted by accident]
(Dc diagram shown, AC is similar).
so, what happens?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But it can get overloaded, and no longer works.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Here is a simplified AC power diagram.
Barnstars:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The other is “what does a “fuse” do?”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At least they know the answer if they wanted it.
It also is a device that limits the change in current flow.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
a photo is worth a thousand words.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but this device (an Inductor) … impedes the rapid changes in the current.
This is 'the assistant's answer'
2024–10–10[John johnson John Johnson ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This device then solves the entire problem.